{"id":2759,"date":"2017-11-23T07:15:05","date_gmt":"2017-11-23T07:15:05","guid":{"rendered":"https:\/\/www.mark3d.com\/de\/?p=2759"},"modified":"2022-11-10T18:19:53","modified_gmt":"2022-11-10T18:19:53","slug":"3d-gedruckte-teile-nachbearbeiten-und-lackieren","status":"publish","type":"post","link":"https:\/\/www.mark3d.com\/de\/en\/druckmaterialien\/3d-gedruckte-teile-nachbearbeiten-und-lackieren\/","title":{"rendered":"Rework and paint 3D-printed parts"},"content":{"rendered":"

The high-strength properties of reinforcing fibers and the surface texture of onyx allow for beautiful and functional 3D-printed components. However, some components require a special aesthetic. In this blog post, we explain how to paint or varnish 3D-printed components.<\/span><\/p>\n

1. Prepare<\/strong><\/h2>\n

The 3D-printed part must be prepared for painting. To ensure the paint adheres to all surfaces, any residue from support material or reinforcing fiber must be removed. <\/span>Wash off the gluing residue with water and let your component dry.<\/span><\/p>\n

\"\"

Wash any adhesive residue from the 3D printed part.<\/p><\/div>\n

2. Get in shape<\/strong><\/h2>\n

You can easily remove small threads or lumps with tweezers or side cutters.<\/span><\/p>\n

\"\"

Carefully remove any unwanted material.<\/p><\/div>\n

3. Fine grinding<\/strong><\/h2>\n

To remove rough spots, layer patterns, or minor scratches, we recommend wet sanding with 220-grit sandpaper. Protect yourself from potential carbon fiber dust with good ventilation and a face mask.<\/span><\/p>\n

\"\"

Be careful not to sand the exterior walls completely.<\/p><\/div>\n

4. Remove dust<\/strong><\/h2>\n

After sanding, wash off the fine dust particles with a wet dish brush. Make sure to get into every nook and cranny. Once dry, you can remove any remaining residue with a duster.<\/span><\/p>\n

 <\/p>\n<\/div>

<\/div>
<\/div>
<\/div>
<\/div><\/div><\/div><\/div><\/div>

Request a DEMO component now!<\/strong><\/span><\/h2><\/div>
<\/div>
<\/div>
<\/div>

See for yourself how strong the components are.<\/span><\/p>\n<\/div>

<\/div>
<\/div>
<\/div>
Request a DEMO component now<\/span><\/a><\/div>
<\/div><\/div><\/div>
<\/div>
<\/div>
<\/div>
<\/div>
<\/div>
<\/div>
<\/span><\/div>
<\/div><\/div><\/div><\/div>
<\/div><\/div><\/div><\/div><\/div>

 <\/p>\n

Method: Spray paint <\/h1>\n

1. Select spray paint<\/strong><\/h2>\n

Spray paint can be applied to 3D-printed components just like standard plastic parts. Nylon is a highly polar polymer and well-suited for this type of treatment. Use a paint suitable for plastics! To prevent the part from absorbing the paint, a primer is applied. Again, make sure it's suitable for plastic.<\/span><\/p>\n

2. Security measures<\/h2>\n

Find a well-ventilated area to paint and dry. If possible, use a fume hood or spray booth. Wear respirators and gloves.<\/span><\/p>\n

\"\"

Paint in a well-ventilated area, wearing respiratory protection and gloves.<\/p><\/div>\n

3. Set up the part<\/strong><\/h2>\n

To paint the entire piece in one go, hang it up or place it on a stand. This way, you can reach every corner, even with more complicated geometries. If you don't have a special jig available, simply place the piece on a piece of newspaper. This will keep the area clean. If you only want to paint certain parts of the piece, you can cover the rest with masking tape.<\/span><\/p>\n

4. Apply primer<\/h2>\n

Spray the primer onto the 3D-printed part. Spray distance and drying times vary depending on the brand. You can find these in the enclosed instructions or on the spray can. You need to prime everything that will be painted later. You may need to let the top dry, flip the part over, and prime the bottom.<\/span><\/p>\n

\"\"

The primer ensures that the paint is not absorbed.<\/p><\/div>\n

5. Apply top coat<\/strong><\/h2>\n

Once the primer is dry, spray the paint. Again, follow the manufacturer's instructions. If you spray too close or for too long in one spot, the paint will start to run unsightly. As with the primer, you can paint the first side, let the paint dry, flip the piece over, and paint the other side.<\/span><\/p>\n

\"\"

Apply the top coat and let it dry.<\/p><\/div>\n

6. Let it dry<\/strong><\/h2>\n

Let the piece dry. Follow the paint manufacturer's instructions. After that, the piece is finished.<\/span><\/p>\n

\"\"

The finished 3D-printed mask<\/p><\/div>\n

Method: Hand painting<\/strong><\/h1>\n

1. Select varnish<\/h2>\n

 Acrylic paint is very suitable for painting our plastic parts.<\/span><\/p>\n

2. Primer<\/h2>\n

Even when painting by hand, a primer is required to prevent the piece from absorbing the paint. You can paint the piece as described above.<\/span><\/p>\n

\"\"

An onyx piece painted without primer. Several more coats would be required before the varnish would cover.<\/p><\/div>\n

 <\/p>\n

\"\"

If primer is applied beforehand, the paint will not be absorbed.<\/p><\/div>\n

3. Painting<\/strong><\/h2>\n

Once the primer is dry, you can paint the piece as desired. Make sure the room is well ventilated.<\/span><\/p>\n

\"\"

Hand-applied paint gives the piece a very special aesthetic.<\/p><\/div>\n

4. Let it dry<\/strong><\/h2>\n

Then let the part dry. Done.<\/span><\/p>\n

\"\"<\/p>\n

 <\/p>\n<\/div>

Further options for post-processing 3D printed components.<\/span><\/a><\/div>
<\/div><\/div><\/div><\/div><\/div><\/p>","protected":false},"excerpt":{"rendered":"","protected":false},"author":24,"featured_media":2760,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"inline_featured_image":false,"footnotes":""},"categories":[68,61],"tags":[],"class_list":["post-2759","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-druckmaterialien","category-tipps-zu-technik-und-design"],"yoast_head":"\n3D-gedruckte Teile nachbearbeiten und lackieren - Mark3D - Markforged 3D-Drucker<\/title>\n<meta name=\"description\" content=\"\u00c4sthetische, 3d-gedruckte Bauteile! In diesem Blogbeitrag erkl\u00e4ren wir Ihnen, wie man 3d-gerdruckte Bauteile farbig lackieren bzw. bemalen kann.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.mark3d.com\/de\/en\/druckmaterialien\/3d-gedruckte-teile-nachbearbeiten-und-lackieren\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"3D-gedruckte Teile nachbearbeiten und lackieren\" \/>\n<meta property=\"og:description\" content=\"\u00c4sthetische, 3d-gedruckte Bauteile! In diesem Blogbeitrag erkl\u00e4ren wir Ihnen, wie man 3d-gerdruckte Bauteile farbig lackieren bzw. bemalen kann.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.mark3d.com\/de\/en\/druckmaterialien\/3d-gedruckte-teile-nachbearbeiten-und-lackieren\/\" \/>\n<meta property=\"og:site_name\" content=\"Mark3D - Markforged 3D-Drucker\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/Mark3DGmbH\/\" \/>\n<meta property=\"article:author\" content=\"https:\/\/www.facebook.com\/meinsolidworks.de\/\" \/>\n<meta property=\"article:published_time\" content=\"2017-11-23T07:15:05+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2022-11-10T18:19:53+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.mark3d.com\/de\/wp-content\/uploads\/2017\/10\/nachbarbeiten_und_lackieren.jpeg\" \/>\n\t<meta property=\"og:image:width\" content=\"770\" \/>\n\t<meta property=\"og:image:height\" content=\"513\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Isabelle Geil\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@meinSOLIDWORKS\" \/>\n<meta name=\"twitter:site\" content=\"@Mark3D_GmbH\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Isabelle Geil\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"10 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.mark3d.com\\\/de\\\/druckmaterialien\\\/3d-gedruckte-teile-nachbearbeiten-und-lackieren\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.mark3d.com\\\/de\\\/druckmaterialien\\\/3d-gedruckte-teile-nachbearbeiten-und-lackieren\\\/\"},\"author\":{\"name\":\"Isabelle Geil\",\"@id\":\"https:\\\/\\\/www.mark3d.com\\\/de\\\/#\\\/schema\\\/person\\\/77c3b37f505f85cf62227f230daeecc1\"},\"headline\":\"3D-gedruckte Teile nachbearbeiten und lackieren\",\"datePublished\":\"2017-11-23T07:15:05+00:00\",\"dateModified\":\"2022-11-10T18:19:53+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.mark3d.com\\\/de\\\/druckmaterialien\\\/3d-gedruckte-teile-nachbearbeiten-und-lackieren\\\/\"},\"wordCount\":2547,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\\\/\\\/www.mark3d.com\\\/de\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/www.mark3d.com\\\/de\\\/druckmaterialien\\\/3d-gedruckte-teile-nachbearbeiten-und-lackieren\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.mark3d.com\\\/de\\\/wp-content\\\/uploads\\\/2017\\\/10\\\/nachbarbeiten_und_lackieren.jpeg\",\"articleSection\":[\"Druckmaterialien\",\"Technik und Design\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/www.mark3d.com\\\/de\\\/druckmaterialien\\\/3d-gedruckte-teile-nachbearbeiten-und-lackieren\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.mark3d.com\\\/de\\\/druckmaterialien\\\/3d-gedruckte-teile-nachbearbeiten-und-lackieren\\\/\",\"url\":\"https:\\\/\\\/www.mark3d.com\\\/de\\\/druckmaterialien\\\/3d-gedruckte-teile-nachbearbeiten-und-lackieren\\\/\",\"name\":\"3D-gedruckte Teile nachbearbeiten und lackieren - Mark3D - Markforged 3D-Drucker\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.mark3d.com\\\/de\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.mark3d.com\\\/de\\\/druckmaterialien\\\/3d-gedruckte-teile-nachbearbeiten-und-lackieren\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.mark3d.com\\\/de\\\/druckmaterialien\\\/3d-gedruckte-teile-nachbearbeiten-und-lackieren\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.mark3d.com\\\/de\\\/wp-content\\\/uploads\\\/2017\\\/10\\\/nachbarbeiten_und_lackieren.jpeg\",\"datePublished\":\"2017-11-23T07:15:05+00:00\",\"dateModified\":\"2022-11-10T18:19:53+00:00\",\"description\":\"\u00c4sthetische, 3d-gedruckte Bauteile! In diesem Blogbeitrag erkl\u00e4ren wir Ihnen, wie man 3d-gerdruckte Bauteile farbig lackieren bzw. bemalen kann.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.mark3d.com\\\/de\\\/druckmaterialien\\\/3d-gedruckte-teile-nachbearbeiten-und-lackieren\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.mark3d.com\\\/de\\\/druckmaterialien\\\/3d-gedruckte-teile-nachbearbeiten-und-lackieren\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.mark3d.com\\\/de\\\/druckmaterialien\\\/3d-gedruckte-teile-nachbearbeiten-und-lackieren\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.mark3d.com\\\/de\\\/wp-content\\\/uploads\\\/2017\\\/10\\\/nachbarbeiten_und_lackieren.jpeg\",\"contentUrl\":\"https:\\\/\\\/www.mark3d.com\\\/de\\\/wp-content\\\/uploads\\\/2017\\\/10\\\/nachbarbeiten_und_lackieren.jpeg\",\"width\":770,\"height\":513},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.mark3d.com\\\/de\\\/druckmaterialien\\\/3d-gedruckte-teile-nachbearbeiten-und-lackieren\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Startseite\",\"item\":\"https:\\\/\\\/www.mark3d.com\\\/de\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"3D-gedruckte Teile nachbearbeiten und lackieren\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.mark3d.com\\\/de\\\/#website\",\"url\":\"https:\\\/\\\/www.mark3d.com\\\/de\\\/\",\"name\":\"Mark3D\",\"description\":\"Industrielle 3D Drucker von Markforged\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.mark3d.com\\\/de\\\/#organization\"},\"alternateName\":\"Mark3D GmbH\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.mark3d.com\\\/de\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.mark3d.com\\\/de\\\/#organization\",\"name\":\"Mark3D GmbH\",\"url\":\"https:\\\/\\\/www.mark3d.com\\\/de\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.mark3d.com\\\/de\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.mark3d.com\\\/de\\\/wp-content\\\/uploads\\\/2021\\\/05\\\/markforged-linkedin.jpg\",\"contentUrl\":\"https:\\\/\\\/www.mark3d.com\\\/de\\\/wp-content\\\/uploads\\\/2021\\\/05\\\/markforged-linkedin.jpg\",\"width\":800,\"height\":800,\"caption\":\"Mark3D GmbH\"},\"image\":{\"@id\":\"https:\\\/\\\/www.mark3d.com\\\/de\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/Mark3DGmbH\\\/\",\"https:\\\/\\\/x.com\\\/Mark3D_GmbH\",\"https:\\\/\\\/www.instagram.com\\\/mark3d_print_stronger\\\/\",\"https:\\\/\\\/www.linkedin.com\\\/company\\\/mark3d\\\/\",\"https:\\\/\\\/www.youtube.com\\\/channel\\\/UCo55w2I5eBrCvCB3oKH2WDg\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.mark3d.com\\\/de\\\/#\\\/schema\\\/person\\\/77c3b37f505f85cf62227f230daeecc1\",\"name\":\"Isabelle Geil\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/4bf0a426422ba1fb3bec9ff7c175a269ca8bb05a7c3d89ebda74bd27fb91ed36?s=96&d=wp_user_avatar&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/4bf0a426422ba1fb3bec9ff7c175a269ca8bb05a7c3d89ebda74bd27fb91ed36?s=96&d=wp_user_avatar&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/4bf0a426422ba1fb3bec9ff7c175a269ca8bb05a7c3d89ebda74bd27fb91ed36?s=96&d=wp_user_avatar&r=g\",\"caption\":\"Isabelle Geil\"},\"sameAs\":[\"http:\\\/\\\/www.meinsolidworks.de\",\"https:\\\/\\\/www.facebook.com\\\/meinsolidworks.de\\\/\",\"https:\\\/\\\/x.com\\\/meinSOLIDWORKS\"],\"url\":\"https:\\\/\\\/www.mark3d.com\\\/de\\\/en\\\/author\\\/isabelle-geil\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"Post-processing and painting 3D-printed parts - Mark3D - Markforged 3D printer","description":"Aesthetic, 3d-printed components! In this blog post, we explain how to paint 3d-printed components in color.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.mark3d.com\/de\/en\/druckmaterialien\/3d-gedruckte-teile-nachbearbeiten-und-lackieren\/","og_locale":"en_US","og_type":"article","og_title":"3D-gedruckte Teile nachbearbeiten und lackieren","og_description":"\u00c4sthetische, 3d-gedruckte Bauteile! In diesem Blogbeitrag erkl\u00e4ren wir Ihnen, wie man 3d-gerdruckte Bauteile farbig lackieren bzw. bemalen kann.","og_url":"https:\/\/www.mark3d.com\/de\/en\/druckmaterialien\/3d-gedruckte-teile-nachbearbeiten-und-lackieren\/","og_site_name":"Mark3D - Markforged 3D-Drucker","article_publisher":"https:\/\/www.facebook.com\/Mark3DGmbH\/","article_author":"https:\/\/www.facebook.com\/meinsolidworks.de\/","article_published_time":"2017-11-23T07:15:05+00:00","article_modified_time":"2022-11-10T18:19:53+00:00","og_image":[{"width":770,"height":513,"url":"https:\/\/www.mark3d.com\/de\/wp-content\/uploads\/2017\/10\/nachbarbeiten_und_lackieren.jpeg","type":"image\/jpeg"}],"author":"Isabelle Geil","twitter_card":"summary_large_image","twitter_creator":"@meinSOLIDWORKS","twitter_site":"@Mark3D_GmbH","twitter_misc":{"Written by":"Isabelle Geil","Est. reading time":"10 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.mark3d.com\/de\/druckmaterialien\/3d-gedruckte-teile-nachbearbeiten-und-lackieren\/#article","isPartOf":{"@id":"https:\/\/www.mark3d.com\/de\/druckmaterialien\/3d-gedruckte-teile-nachbearbeiten-und-lackieren\/"},"author":{"name":"Isabelle Geil","@id":"https:\/\/www.mark3d.com\/de\/#\/schema\/person\/77c3b37f505f85cf62227f230daeecc1"},"headline":"3D-gedruckte Teile nachbearbeiten und lackieren","datePublished":"2017-11-23T07:15:05+00:00","dateModified":"2022-11-10T18:19:53+00:00","mainEntityOfPage":{"@id":"https:\/\/www.mark3d.com\/de\/druckmaterialien\/3d-gedruckte-teile-nachbearbeiten-und-lackieren\/"},"wordCount":2547,"commentCount":0,"publisher":{"@id":"https:\/\/www.mark3d.com\/de\/#organization"},"image":{"@id":"https:\/\/www.mark3d.com\/de\/druckmaterialien\/3d-gedruckte-teile-nachbearbeiten-und-lackieren\/#primaryimage"},"thumbnailUrl":"https:\/\/www.mark3d.com\/de\/wp-content\/uploads\/2017\/10\/nachbarbeiten_und_lackieren.jpeg","articleSection":["Druckmaterialien","Technik und Design"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.mark3d.com\/de\/druckmaterialien\/3d-gedruckte-teile-nachbearbeiten-und-lackieren\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.mark3d.com\/de\/druckmaterialien\/3d-gedruckte-teile-nachbearbeiten-und-lackieren\/","url":"https:\/\/www.mark3d.com\/de\/druckmaterialien\/3d-gedruckte-teile-nachbearbeiten-und-lackieren\/","name":"Post-processing and painting 3D-printed parts - Mark3D - Markforged 3D printer","isPartOf":{"@id":"https:\/\/www.mark3d.com\/de\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.mark3d.com\/de\/druckmaterialien\/3d-gedruckte-teile-nachbearbeiten-und-lackieren\/#primaryimage"},"image":{"@id":"https:\/\/www.mark3d.com\/de\/druckmaterialien\/3d-gedruckte-teile-nachbearbeiten-und-lackieren\/#primaryimage"},"thumbnailUrl":"https:\/\/www.mark3d.com\/de\/wp-content\/uploads\/2017\/10\/nachbarbeiten_und_lackieren.jpeg","datePublished":"2017-11-23T07:15:05+00:00","dateModified":"2022-11-10T18:19:53+00:00","description":"Aesthetic, 3d-printed components! In this blog post, we explain how to paint 3d-printed components in color.","breadcrumb":{"@id":"https:\/\/www.mark3d.com\/de\/druckmaterialien\/3d-gedruckte-teile-nachbearbeiten-und-lackieren\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.mark3d.com\/de\/druckmaterialien\/3d-gedruckte-teile-nachbearbeiten-und-lackieren\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.mark3d.com\/de\/druckmaterialien\/3d-gedruckte-teile-nachbearbeiten-und-lackieren\/#primaryimage","url":"https:\/\/www.mark3d.com\/de\/wp-content\/uploads\/2017\/10\/nachbarbeiten_und_lackieren.jpeg","contentUrl":"https:\/\/www.mark3d.com\/de\/wp-content\/uploads\/2017\/10\/nachbarbeiten_und_lackieren.jpeg","width":770,"height":513},{"@type":"BreadcrumbList","@id":"https:\/\/www.mark3d.com\/de\/druckmaterialien\/3d-gedruckte-teile-nachbearbeiten-und-lackieren\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Startseite","item":"https:\/\/www.mark3d.com\/de\/"},{"@type":"ListItem","position":2,"name":"3D-gedruckte Teile nachbearbeiten und lackieren"}]},{"@type":"WebSite","@id":"https:\/\/www.mark3d.com\/de\/#website","url":"https:\/\/www.mark3d.com\/de\/","name":"Mark3D","description":"Industrial 3D printers from Markforged","publisher":{"@id":"https:\/\/www.mark3d.com\/de\/#organization"},"alternateName":"Mark3D GmbH","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.mark3d.com\/de\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.mark3d.com\/de\/#organization","name":"Mark3D GmbH","url":"https:\/\/www.mark3d.com\/de\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.mark3d.com\/de\/#\/schema\/logo\/image\/","url":"https:\/\/www.mark3d.com\/de\/wp-content\/uploads\/2021\/05\/markforged-linkedin.jpg","contentUrl":"https:\/\/www.mark3d.com\/de\/wp-content\/uploads\/2021\/05\/markforged-linkedin.jpg","width":800,"height":800,"caption":"Mark3D GmbH"},"image":{"@id":"https:\/\/www.mark3d.com\/de\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/Mark3DGmbH\/","https:\/\/x.com\/Mark3D_GmbH","https:\/\/www.instagram.com\/mark3d_print_stronger\/","https:\/\/www.linkedin.com\/company\/mark3d\/","https:\/\/www.youtube.com\/channel\/UCo55w2I5eBrCvCB3oKH2WDg"]},{"@type":"Person","@id":"https:\/\/www.mark3d.com\/de\/#\/schema\/person\/77c3b37f505f85cf62227f230daeecc1","name":"Isabelle Geil","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/4bf0a426422ba1fb3bec9ff7c175a269ca8bb05a7c3d89ebda74bd27fb91ed36?s=96&d=wp_user_avatar&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/4bf0a426422ba1fb3bec9ff7c175a269ca8bb05a7c3d89ebda74bd27fb91ed36?s=96&d=wp_user_avatar&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/4bf0a426422ba1fb3bec9ff7c175a269ca8bb05a7c3d89ebda74bd27fb91ed36?s=96&d=wp_user_avatar&r=g","caption":"Isabelle Geil"},"sameAs":["http:\/\/www.meinsolidworks.de","https:\/\/www.facebook.com\/meinsolidworks.de\/","https:\/\/x.com\/meinSOLIDWORKS"],"url":"https:\/\/www.mark3d.com\/de\/en\/author\/isabelle-geil\/"}]}},"acf":[],"_links":{"self":[{"href":"https:\/\/www.mark3d.com\/de\/en\/wp-json\/wp\/v2\/posts\/2759","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.mark3d.com\/de\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.mark3d.com\/de\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.mark3d.com\/de\/en\/wp-json\/wp\/v2\/users\/24"}],"replies":[{"embeddable":true,"href":"https:\/\/www.mark3d.com\/de\/en\/wp-json\/wp\/v2\/comments?post=2759"}],"version-history":[{"count":0,"href":"https:\/\/www.mark3d.com\/de\/en\/wp-json\/wp\/v2\/posts\/2759\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.mark3d.com\/de\/en\/wp-json\/wp\/v2\/media\/2760"}],"wp:attachment":[{"href":"https:\/\/www.mark3d.com\/de\/en\/wp-json\/wp\/v2\/media?parent=2759"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.mark3d.com\/de\/en\/wp-json\/wp\/v2\/categories?post=2759"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.mark3d.com\/de\/en\/wp-json\/wp\/v2\/tags?post=2759"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}