Additively Manufactured Equipment at CORAM TOOLS GMBH<\/span><\/h1><\/div><\/div><\/div><\/div><\/div><\/div>![](\"https:\/\/www.mark3d.com\/en\/wp-content\/uploads\/sites\/6\/2021\/08\/CORAM-COVER-1-300x178.png\" "\\"CORAM")
<\/span><\/div><\/div><\/div><\/div>In 1997 the production of B-Cut saw blades for the oscillating multifunctional machines began under the name maRoc. Until the name change at the end of 2011, the E-Cut saw blades were produced there exclusively for a machine manufacturer. Since then, CORAM TOOLS GMBH has been on the market with its current trademark.<\/span><\/p>\n<\/div><\/i>Download Case Study<\/span><\/a><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>Challenge<\/span><\/h2><\/div>Diverse variants in a few production lines<\/strong>.<\/span><\/p>\nBehind the CORAM TOOLS GMBH brand is the inventor and managing director Marco Steiger.
\nThe oscillating saw blades can be used to make very thin, filigree cuts, for example for window frames or doors. The tools have different holders that vary for the respective machine manufacturer, hardness (I, B, H), areas of application (wood, metal, PVC or combinations). CORAM TOOLS produces 66 different saw blades. The challenge here is to make production as productive as possible despite the high diversity..<\/span><\/p>\n<\/div><\/div><\/div><\/div>![](\"https:\/\/www.mark3d.com\/en\/wp-content\/uploads\/sites\/6\/2021\/08\/CORAMTOOLS_Unterschiedliche_Saegeblaetter-600x450-1-300x225.jpeg\" "\\"CORAMTOOLS_Unterschiedliche_Saegeblaetter-600×450\\"")
<\/span><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>Request a demo!<\/strong><\/span><\/h2><\/div><\/div><\/div><\/div>Feel the strength of continuous fiber for yourself.<\/span><\/p>\n<\/div><\/div><\/div><\/div>Get a Sample Part<\/span><\/a><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>![\"metal-x-3d-printer-markforged-brakelever\"](\"https:\/\/www.mark3d.com\/en\/wp-content\/uploads\/sites\/6\/2018\/10\/metal-x-3d-drucker-markforged-bauteile.jpg\" "\\"metal-x-3d-printer-markforged-brakelever\\"")
<\/span><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>![](\"https:\/\/www.mark3d.com\/en\/wp-content\/uploads\/sites\/6\/2021\/08\/CORAM_TOOLS_Laserbeschriftung-600x450-1.jpeg\" "\\"CORAM_TOOLS_Laserbeschriftung-600×450\\"")
<\/span><\/div><\/div><\/div><\/div>Solution<\/span><\/h2><\/div><\/div><\/div><\/div>Quick changeover during retrofitting-<\/strong><\/strong>Not all variants can run in one production line at the
\nsame time, which is why the line has to be retrofitted again and again. How can you simplify that?<\/span><\/p>\nCORAM TOOLS made its first attempt in the field of high-strength, fiber-reinforced 3D printed parts on a gripper. This implementation made it possible to quickly manufacture individual and lightweight grippers.<\/span><\/p>\nIf you go through the production at CORAM TOOLS, you will notice that not only one part was produced with the 3D printer, but that various small aids are used everywhere. The simplest things were implemented; From the collecting container to the mounting bracket, production equipment, and production line optimizations have been carried out, which is reflected in an increase in speed and a reduction in downtimes..<\/span><\/p>\nThe example on the left shows the laser marking step. For this purpose, the recordings are held with optimally designed 3D printed grippers during the labeling. Wherever a laser is used, there is heat. The Onyx grippers have a heat resistance of 145 \u00b0 C – and even much more when used for a short period of time.<\/span><\/p>\nAll saw blades are labeled, sometimes also individually with the customer’s logo. Incorrectly labeled parts are not simply thrown away but are put into a bath with liquid paint remover. The bracket for this is printed with onyx. Despite the very aggressive agent, Onyx easily withstands the challenges!<\/span><\/p>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>The Future<\/span><\/h2><\/div><\/div><\/div><\/div>Smart Tools<\/strong><\/span><\/p>\nOriginally, the scrap was thrown from the machine into a box that stood on the floor. Sometimes more, sometimes less successful. But Marco Steiger had a better idea: He designed a collecting container that could be mounted directly on the machine. So that it doesn’t break off and the parts fall back on, he reinforced the 3D printed containers with continuous fibers. So everything stays where it belongs.
\nThe collecting bins have been painted red for better visibility.<\/span><\/p>\nSo far, the rest of the process is still the same: Each scrap part has a routing slip on which all of the relevant data can be found. A possible next step would be to build an RFID chip into the container so that the entire process can be digitally recorded and categorized.<\/span><\/p>\nThere are many other examples of how CORAM TOOLS uses the 3D printer. If there is free capacity on Mark Two, CORAM TOOLS also offers printing services.<\/span><\/p>\n3D printing is successfully used in a wide variety of production halls. Additive manufacturing is not a technology of the future.<\/span><\/p>\nThe future is now!<\/span><\/p>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>![](\"https:\/\/www.mark3d.com\/en\/wp-content\/uploads\/sites\/6\/2021\/08\/CORAM_TOOLS_Auffangschalen-600x450-1-300x225.jpeg\" "\\"CORAM_TOOLS_Auffangschalen-600×450\\"")
<\/span><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>Learn more about 3D printing continuous fibres!<\/span><\/h2><\/div>Which continuous fibre is suitable for which applications? How do I design correctly for filament 3D printing? What do users say and where can I find more information? – This is the right place for you! We listed some information leading you directly to the matching answers.<\/span><\/p>\n<\/div><\/div><\/div><\/div>![\"Lean](\"https:\/\/www.mark3d.com\/de\/wp-content\/uploads\/2020\/04\/3d-druck-software-eiger-2-markforged-mark3d_400x351px.png\" "\\"Lean")
<\/span><\/div><\/div>Composite Design Guide<\/span><\/h2><\/div>DfAM – How do you design your part best for 3D printing with composites? In this guide you will get valuable tips for design and material selection.<\/span><\/p>\n<\/div><\/i>Learn More<\/span><\/a><\/div><\/div><\/div><\/div>![](\"https:\/\/www.mark3d.com\/de\/wp-content\/uploads\/2020\/04\/Klemmbacken_400x351px.png\" "\\"ProCobots")
<\/span><\/div><\/div>3D printing in production<\/span><\/h2><\/div>This free guide serves as a source of information for engineers and contractors who want to integrate a 3D printer into their manufacturing process.<\/span><\/p>\n<\/div><\/i>Learn More<\/span><\/a><\/div><\/div><\/div><\/div>![](\"https:\/\/www.mark3d.com\/de\/wp-content\/uploads\/2020\/03\/primetall-Markforged-metal_X-metall-3D-druck-mark3d.jpg\")
<\/span><\/div><\/div>Primetall Case Study<\/span><\/h2><\/div>In this practical case study from Primetall, 3D printing was used to print custom fixtures. It was practically “drilled around the corner”.<\/span><\/p>\n<\/div>
<\/span><\/div>In 1997 the production of B-Cut saw blades for the oscillating multifunctional machines began under the name maRoc. Until the name change at the end of 2011, the E-Cut saw blades were produced there exclusively for a machine manufacturer. Since then, CORAM TOOLS GMBH has been on the market with its current trademark.<\/span><\/p>\n<\/div> Diverse variants in a few production lines<\/strong>.<\/span><\/p>\n Behind the CORAM TOOLS GMBH brand is the inventor and managing director Marco Steiger. Feel the strength of continuous fiber for yourself.<\/span><\/p>\n<\/div> Quick changeover during retrofitting-<\/strong><\/strong>Not all variants can run in one production line at the CORAM TOOLS made its first attempt in the field of high-strength, fiber-reinforced 3D printed parts on a gripper. This implementation made it possible to quickly manufacture individual and lightweight grippers.<\/span><\/p>\n If you go through the production at CORAM TOOLS, you will notice that not only one part was produced with the 3D printer, but that various small aids are used everywhere. The simplest things were implemented; From the collecting container to the mounting bracket, production equipment, and production line optimizations have been carried out, which is reflected in an increase in speed and a reduction in downtimes..<\/span><\/p>\n The example on the left shows the laser marking step. For this purpose, the recordings are held with optimally designed 3D printed grippers during the labeling. Wherever a laser is used, there is heat. The Onyx grippers have a heat resistance of 145 \u00b0 C – and even much more when used for a short period of time.<\/span><\/p>\n All saw blades are labeled, sometimes also individually with the customer’s logo. Incorrectly labeled parts are not simply thrown away but are put into a bath with liquid paint remover. The bracket for this is printed with onyx. Despite the very aggressive agent, Onyx easily withstands the challenges!<\/span><\/p>\n<\/div><\/div><\/div> Smart Tools<\/strong><\/span><\/p>\n Originally, the scrap was thrown from the machine into a box that stood on the floor. Sometimes more, sometimes less successful. But Marco Steiger had a better idea: He designed a collecting container that could be mounted directly on the machine. So that it doesn’t break off and the parts fall back on, he reinforced the 3D printed containers with continuous fibers. So everything stays where it belongs. So far, the rest of the process is still the same: Each scrap part has a routing slip on which all of the relevant data can be found. A possible next step would be to build an RFID chip into the container so that the entire process can be digitally recorded and categorized.<\/span><\/p>\n There are many other examples of how CORAM TOOLS uses the 3D printer. If there is free capacity on Mark Two, CORAM TOOLS also offers printing services.<\/span><\/p>\n 3D printing is successfully used in a wide variety of production halls. Additive manufacturing is not a technology of the future.<\/span><\/p>\n The future is now!<\/span><\/p>\n<\/div> Which continuous fibre is suitable for which applications? How do I design correctly for filament 3D printing? What do users say and where can I find more information? – This is the right place for you! We listed some information leading you directly to the matching answers.<\/span><\/p>\n<\/div> DfAM – How do you design your part best for 3D printing with composites? In this guide you will get valuable tips for design and material selection.<\/span><\/p>\n<\/div> This free guide serves as a source of information for engineers and contractors who want to integrate a 3D printer into their manufacturing process.<\/span><\/p>\n<\/div> In this practical case study from Primetall, 3D printing was used to print custom fixtures. It was practically “drilled around the corner”.<\/span><\/p>\n<\/div>Challenge<\/span><\/h2><\/div>
\nThe oscillating saw blades can be used to make very thin, filigree cuts, for example for window frames or doors. The tools have different holders that vary for the respective machine manufacturer, hardness (I, B, H), areas of application (wood, metal, PVC or combinations). CORAM TOOLS produces 66 different saw blades. The challenge here is to make production as productive as possible despite the high diversity..<\/span><\/p>\n<\/div><\/span><\/div><\/div><\/div>Request a demo!<\/strong><\/span><\/h2><\/div>
<\/span><\/div><\/span><\/div>Solution<\/span><\/h2><\/div>
\nsame time, which is why the line has to be retrofitted again and again. How can you simplify that?<\/span><\/p>\nThe Future<\/span><\/h2><\/div>
\nThe collecting bins have been painted red for better visibility.<\/span><\/p>\n<\/span><\/div><\/div><\/div>Learn more about 3D printing continuous fibres!<\/span><\/h2><\/div>
<\/span><\/div><\/div>Composite Design Guide<\/span><\/h2><\/div>
<\/span><\/div><\/div>3D printing in production<\/span><\/h2><\/div>
<\/span><\/div><\/div>Primetall Case Study<\/span><\/h2><\/div>
![\"markforged-cnc-vs-3d](\"https:\/\/www.mark3d.com\/en\/wp-content\/uploads\/sites\/6\/2020\/06\/markforged-cnc-vs-3ddruck-mark3d-400x351px.png\" "\\"markforged-cnc-vs-3d")
<\/span><\/div><\/div>