From Scan to CAD: The Future of Reverse Engineering
Discover how 3D scanning, intelligent software and emerging AI tools are changing the journey from physical component to usable CAD.
10th November 2026, 1.30 – 4.00pm at the iAero Centre, Yeovil, Somerset
17th November 2026, 9.00 – 12.30 at Mark3D Showroom, Romsley, Halesowen, West Midlands
19th November 2026, 9.00 – 12.30 at Mark3D Showroom, Romsley, Halesowen, West Midlands
Whether you need to recreate a legacy component, modify an existing design or capture complex geometry, reverse engineering can provide a faster route from a physical part to accurate, usable engineering data.
Join Mark3D for a practical introduction to the complete reverse-engineering workflow. We will explore how modern 3D scanning and software can help engineering teams capture physical components, process scan data and move towards editable CAD models for redesign, validation and manufacture.
Where the objective is simply to reproduce the captured geometry, processed scan data can also be prepared as a printable mesh and sent directly to a 3D printer, avoiding the need to rebuild the part fully in CAD. If the component needs to be modified, dimensionally controlled or recreated with its original design intent, a reverse-engineered CAD model will usually be the more appropriate route.
Attendance is free, but places are limited to approximately 20 people.
What you will learn
During the session, the Mark3D team will take you through the journey from physical component to digital engineering data, including:
- How modern 3D scanners capture complex components and geometry
- The role of Artec Studio in processing and preparing scan data
- The difference between a 3D scan, a mesh and an editable CAD model
- How reverse engineering can support legacy parts, product development and inspection
- Where emerging AI tools may influence future reverse-engineering workflows
- How scan data can be converted into editable CAD or, where appropriate, prepared for direct 3D printing.
You will see scanning technology in action and follow a prepared scan-to-CAD workflow without waiting for every stage of the process to be completed live.
Bring your own component
Do you have a component, tool or assembly that you need to reproduce, modify or inspect, but no longer have reliable CAD data for?
Bring it with you and discuss the application directly with the Mark3D team. Where time and suitability allow, we may begin capturing selected components during the session. Any further processing or assessment can be completed after the event as part of a follow-up discussion.
Please tell us about your component when registering so that our team can prepare.
Who should attend?
This event is suitable for:
- Design and development engineers
- Manufacturing engineers
- Maintenance and asset-management teams
- Quality and inspection professionals
- CAD engineers
- Engineering and production managers
- Anyone investigating 3D scanning or reverse engineering for a current application.
See what reverse engineering could mean for your operation
The event will conclude with time to speak directly with the Mark3D team, explore the technology and discuss your own engineering challenges.
Places are limited, so early registration is recommended.




